ECM > REMOVAL |
for Preparation Click here
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY |
Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.
Text in Illustration *1 Stopper
Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
Text in Illustration *1 Hinge
3. REMOVE 4WD CONTROL ECU (for 4WD) |
Disconnect the connector.
Remove the bolt and ECU.
4. REMOVE ECM |
Disconnect the 4 connectors.
Remove the bolt, 2 nuts and ECM.
5. REMOVE NO. 1 ECM BRACKET |
Remove the 3 screws and bracket.
6. REMOVE NO. 2 ECM BRACKET |
Remove the 2 screws and bracket.