AIR FUEL RATIO SENSOR (for Hatchback) > REMOVAL |
for Preparation Click here
1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY |
2. REMOVE FRONT NO. 1 VENTILATOR SEAL |
Disengage the clamp and remove the front No. 1 ventilator seal.
3. REMOVE FRONT AIR SHUTTER SEAL RH |
- HINT:
- Use the same procedure as for the No. 1 ventilator seal.
4. REMOVE INNER COWL TOP TO COWL BRACE |
Remove the 2 bolts and the inner cowl top to cowl brace.
5. REMOVE OUTER COWL TOP PANEL |
Disengage the 2 clamps and separate the wire harness.
Remove the 8 bolts and the outer cowl top panel.
6. REMOVE AIR FUEL RATIO SENSOR |
Disconnect the air fuel ratio sensor connector.
Disengage the clamp and disconnect the air fuel ratio sensor wire from the wire harness clamp bracket.
Using SST, remove the air fuel ratio sensor.
- SST
- 09224-00010