BACK-UP LIGHT SWITCH (for Hatchback) > INSPECTION



1. INSPECT BACK UP LIGHT SWITCH ASSEMBLY


C235552E01

  1. Measure the resistance according to the value(s) in the table below.

    Text in Illustration 
    *a
    		Component without harness connected
    (Back Up Light Switch Assembly)
    *b
    		1.1 mm (0.0433 in.)
    *c
    		ON
    *d
    		OFF

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    1 - 2
    		Pushed (ON)
    		Below 1 Ω
    1 - 2
    		Released (OFF)
    		10 kΩ or higher
    If the result is not as specified, replace the back up light switch assembly.