DOOR CONTROL RECEIVER (for Hatchback 3 Door) > REMOVAL |
1. REMOVE DECK BOARD ASSEMBLY |
Remove the deck board.
2. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) |
3. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) |
4. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type) |
5. REMOVE FRONT DOOR SCUFF PLATE LH |
- HINT:
- Use the same procedure as for the RH side (Click here).
6. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
Separate the front door opening trim.
7. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side (Click here).
8. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side (Click here).
9. REMOVE NO. 2 ROOM LIGHT ASSEMBLY |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw.
Text in Illustration *1 Protective Tape
Disconnect the connector and remove the No. 2 room light assembly.
10. REMOVE REAR FLOOR FINISH PLATE |
Disengage the 4 claws and 4 guides and remove the rear floor finish plate.
11. SEPARATE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side (Click here).
12. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side (Click here).
13. REMOVE ROOF SIDE INNER GARNISH LH |
- HINT:
- Use the same procedure as for the RH side (Click here).
14. REMOVE DOOR CONTROL RECEIVER |
Disconnect the connector.
Remove the bolt.
Disengage the 2 hooks and remove the door control receiver.