EXHAUST PIPE (for Sedan) > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL LOWER CENTER FINISH PANEL


B132316

  1. Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.



2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH


B132317

  1. Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.



3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    B132387

  1. Remove the shift lever knob.



4. REMOVE CONSOLE BOX UPPER PANEL SUB-ASSEMBLY


    B132347

  1. Shift the shift lever into the N position.

  1. Disengage the 5 clips and the claw and remove the upper console panel.



5. REMOVE CONSOLE BOX UPPER REAR PANEL SUB-ASSEMBLY


    B132348

  1. Disengage the 3 clips and 3 claws.

  1. Disconnect the connector and remove the console upper rear panel.



6. REMOVE CONSOLE BOX CARPET


B132346

  1. Remove the console box carpet.



7. REMOVE CONSOLE BOX ASSEMBLY


    B132349

  1. Disconnect the clamp.

  1. Remove the 2 bolts and 2 screws.

  1. Disengage the 4 claws and remove the rear console box.



8. REMOVE LOWER INSTRUMENT PAD LH


B132339

  1. Remove screw <I>.

  1. Disengage the claw and 3 clips and remove the instrument panel pad lower.



9. REMOVE HEATED OXYGEN SENSOR

  1. Disconnect the sensor connector.

  1. Remove the grommet and pass the sensor connector out of the cabin through the floor panel.



    A115424E02

  1. Using SST, remove heated oxygen sensor.

    SST
    09224-00010  


10. REMOVE EXHAUST TAIL PIPE ASSEMBLY

  1. Remove the 2 bolts and 2 compression springs.



  1. Remove the 3 No. 4 exhaust pipe supports and the exhaust tail pipe assembly.


    A143274



11. REMOVE FRONT EXHAUST PIPE ASSEMBLY

  1. Remove the 2 bolts and 2 compression springs.



  1. Remove 3 No. 4 exhaust pipe support and the front exhaust pipe assembly.


    A143275

  1. Remove the 2 exhaust pipe gaskets.