QUARTER TRIM SPEAKER (for Hatchback) > INSPECTION |
1. INSPECT REAR SPEAKER ASSEMBLY |
Check the speaker installation.
- OK:
- The speaker is securely installed.
Visually check the speaker.
- OK:
- The cone paper of the speaker is not torn.
Check the speaker resistance.
Text in Illustration *a Component without harness connected
(Rear Speaker Assembly)
Disconnect the rear speaker assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 1 - 2 Always Approximately 4 Ω