REAR CENTER SEAT OUTER BELT ASSEMBLY (for Hatchback) > INSTALLATION



1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY


    B108365E01
  1. Check the angle of inclination required to lock the retractor.

    1. Gently incline the retractor from its initial position. Check that the belt does not lock when the retractor is inclined 15° or less in any direction. Also, check that the belt locks when the inclination of the retractor is 45° or more.

      Text in Illustration 
      *a
      Lock
      *b
      Unlock

      NOTICE:
      Do not disassemble the retractor.
      If the operation is not as specified, replace the rear center seat outer belt assembly.
  1. Engage the 2 hooks to install the rear center seat outer belt assembly.

  1. Install the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }
  1. Connect the shoulder anchor part of the rear center seat outer belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }
  1. Check that the ELR locks.

    NOTICE:
    Perform the check with the rear center seat outer belt assembly installed.

    1. With the belt installed, check that the belt locks when it is pulled out quickly.
      If the operation is not as specified, replace the rear center seat outer belt assembly.



2. INSTALL REAR SEAT SHOULDER BELT COVER


    B284332
  1. Engage the 6 claws and 2 guides and install the rear seat shoulder belt cover.



3. INSTALL ROOF HEADLINING ASSEMBLY (for 3 Door)
(Click here)


4. INSTALL ROOF HEADLINING ASSEMBLY (for 5 Door)
(Click here)