FRONT BRAKE (for Hatchback) > DISASSEMBLY |
1. REMOVE CYLINDER BOOT |
Using a screwdriver with its tip wrapped in protective tape, remove the set ring and cylinder boot from the disc brake cylinder.
Text in Illustration *1 Protective Tape - NOTICE:
- Be careful not to damage the brake piston or cylinder.
2. REMOVE FRONT DISC BRAKE PISTON |
Place a piece of cloth between the piston and disc brake cylinder.
Text in Illustration *1 Cloth
Apply compressed air to remove the piston from the disc brake cylinder.
- CAUTION:
- Do not place your fingers in front of the piston when applying compressed air.
- NOTICE:
- Do not spatter the brake fluid.
3. REMOVE PISTON SEAL |
Using a screwdriver with its tip wrapped in protective tape, remove the piston seal from the disc brake cylinder.
Text in Illustration *1 Protective Tape - NOTICE:
- Do not damage the inner surface or piston seal groove of the cylinder.
4. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP |
5. REMOVE FRONT DISC BRAKE BLEEDER PLUG |