EGR COOLER > INSTALLATION |
for Preparation Click here
1. INSTALL NO. 2 EGR PIPE SUB-ASSEMBLY |
Install a new gasket and the No. 2 EGR pipe with the 2 bolts.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
- NOTICE:
- Make sure the gasket's claws are not caught between the No. 2 EGR pipe and EGR cooler.
2. INSTALL EGR COOLER ASSEMBLY |
Install the EGR cooler with the 2 bolts.
- Torque:
- 21 N*m{ 214 kgf*cm , 15 ft.*lbf }
3. INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY |
Install 2 new gaskets.
Install the EGR pipe with the 4 nuts, and tighten the nuts in the sequence shown in the illustration.
- Torque:
- 21 N*m{ 214 kgf*cm , 15 ft.*lbf }
4. CONNECT NO. 11 WATER BY-PASS HOSE |
Connect the No. 11 water by-pass hose.
- HINT:
- The direction of the hose clamp is indicated in the illustration.
5. CONNECT NO. 8 WATER BY-PASS HOSE |
Connect the No. 8 water by-pass hose.
- HINT:
- The direction of the hose clamp is indicated in the illustration.
6. INSTALL NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY |
Install the No. 3 water by-pass pipe with the 2 bolts and connect the hose.
- HINT:
- The direction of the hose clamp is indicated in the illustration.
- Torque:
- 10 N*m{ 102 kgf*cm , 7 ft.*lbf }
Connect the No. 4 water by-pass hose.
7. INSTALL INTAKE MANIFOLD ASSEMBLY |
Install the intake manifold (Click here).