SLIDING ROOF SWITCH ASSEMBLY (for CrewMax) > INSPECTION

for Preparation Click here



1. INSPECT SLIDING ROOF SWITCH


B167041E03
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (UP) - 5 (E)
    TILT switch is pressed to up
    Below 1 Ω
    1 (UP) - 5 (E)
    TILT switch is not pressed to up
    10 kΩ or higher
    2 (DOWN) - 5 (E)
    TILT switch is pressed to down
    Below 1 Ω
    2 (DOWN) - 5 (E)
    TILT switch is not pressed to down
    10 kΩ or higher
    4 (OPN) - 5 (E)
    SLIDE switch is pressed to open
    Below 1 Ω
    4 (OPN) - 5 (E)
    SLIDE switch is not pressed to open
    10 kΩ or higher
    3 (CLOSE) - 5 (E)
    SLIDE switch is pressed to close
    Below 1 Ω
    3 (CLOSE) - 5 (E)
    SLIDE switch is not pressed to close
    10 kΩ or higher
    If the result is not as specified, replace the switch.