TRANSMISSION CONTROL CABLE (for Floor Shift Type) > REMOVAL |
for Preparation Click here
1. REMOVE FRONT DOOR SCUFF PLATE LH (for Regular Cab) |
Detach the 6 claws and 3 clips, and remove the front door scuff plate.
2. REMOVE FRONT DOOR SCUFF PLATE LH (for Double Cab, CrewMax) |
Detach the 6 claws and 3 clips, and remove the front door scuff plate.
3. REMOVE COWL SIDE TRIM BOARD LH |
Remove the clip.
Detach the 2 clips and remove the cowl side trim board.
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
Remove the hood lock control lever.
Remove the 2 bolts.
Detach the 9 clips and claw.
for Automatic Air Conditioning System:
Detach the 2 claws and remove the sensor.
Remove the finish panel and then disconnect the connectors.
5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Detach the 12 clips and remove the console panel.
6. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
Remove the clip.
Detach the 6 clips and remove the console panel.
w/ Trailer Towing System:
Disconnect the connector
7. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY |
Using a moulding remover, detach the 7 clips and remove the end panel.
except Regular Cab:
Detach the 2 wire harness clamps and disconnect the connector.
8. REMOVE CONSOLE BOX CARPET |
9. REMOVE REAR CONSOLE BOX ASSEMBLY |
Remove the 2 screws.
Detach the 2 wire harness clamps.
Remove the 4 bolts and rear console box.
10. REMOVE FRONT CONSOLE BOX |
Remove the 2 clips.
Remove the 6 screws and front console box.
11. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY |
Move the shift lever to N.
Disconnect the transmission control cable end from the shift lever.
Remove the clip and disconnect the transmission control cable from the shift lever retainer.
Remove the nut and clip, and disconnect the transmission control cable from the automatic transmission.
Remove the nut and disconnect the transmission control cable support.
Remove the 2 bolts and then pull the transmission control cable into the vehicle to remove it.