POWER SEAT SWITCH (w/o Seat Position Memory System) > INSPECTION |
for Preparation Click here
| 1. INSPECT FRONT POWER SEAT SWITCH LH |
 |
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
- Slide switch:
Tester Connection Switch Condition Specified Condition 9 (SLDF) - 1 (B) FRONT Below 1 Ω 6 (SLDR) - 4 (E) 9 (SLDF) - 4 (E) OFF 6 (SLDR) - 4 (E) 9 (SLDF) - 4 (E) REAR 6 (SLDR) - 1 (B) - Front vertical switch:
Tester Connection Switch Condition Specified Condition 10 (FUP) - 1 (B) UP Below 1 Ω 5 (FDWN) - 4 (E) 10 (FUP) - 4 (E) OFF 5 (FDWN) - 4 (E) 10 (FUP) - 4 (E) DOWN 5 (FDWN) - 1 (B) - Lifter switch:
Tester Connection Switch Condition Specified Condition 7 (LUP) - 1 (B) UP Below 1 Ω 8 (LDWN) - 4 (E) 7 (LUP) - 4 (E) OFF 8 (LDWN) - 4 (E) 7 (LUP) - 4 (E) DOWN 8 (LDWN) - 1 (B) - Reclining switch:
Tester Connection Switch Condition Specified Condition 3 (RCLF) - 1 (B) FRONT Below 1 Ω 2 (RCLR) - 4 (E) 3 (RCLF) - 4 (E) OFF 2 (RCLR) - 4 (E) 3 (RCLF) - 4 (E) REAR 2 (RCLR) - 1 (B)
| 2. INSPECT FRONT POWER SEAT SWITCH RH |
 |
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
- Slide switch:
Tester Connection Switch Condition Specified Condition 9 (SLDF) - 1(B) FRONT Below 1 Ω 6 (SLDR) - 4 (E) 9 (SLDF) - 4 (E) OFF 6 (SLDR) - 4 (E) 9 (SLDF) - 4 (E) REAR 6 (SLDR) - 1 (B) - Reclining switch:
Tester Connection Switch Condition Specified Condition 3 (RCLF) - 1 (B) FRONT Below 1 Ω 2 (RCLR) - 4 (E) 3 (RCLF) - 4 (E) OFF 2 (RCLR) - 4 (E) 3 (RCLF) - 4 (E) REAR 2 (RCLR) - 1 (B)
| 3. INSPECT LEG SUPPORT ADJUSTMENT SWITCH (w/ Leg Support Adjustment Switch) |
 |
Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection Switch Condition Specified Condition 1 (CSNF) - 3 (B) OPEN Below 1 Ω 4 (CSNR) - 5 (E) 1 (CSNF) - 2 (E2) OFF 4 (CSNR) - 5 (E) 1 (CSNF) - 2 (E2) CLOSE 3 (B) - 4 (CSNR)