FUEL PUMP RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. REMOVE FUEL PUMP RELAY (F/PMP)

  1. Remove the fuel pump relay from the engine room relay block.



2. INSPECT FUEL PUMP RELAY


B060778E19

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    		Condition
    		Specified Condition
    3 - 5
    		When no battery voltage is applied to terminals 1 and 2
    		10 kΩ or higher
    When battery voltage is applied to terminals 1 and 2
    		Below 1 Ω
    If the result is not as specified, replace the relay.


3. INSTALL FUEL PUMP RELAY