PARK / NEUTRAL POSITION SWITCH > REMOVAL |
for Preparation Click here
1. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY |
Remove the nut and disconnect the cable.
2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
Disconnect the switch connector.
Remove the nut, spring washer and transmission control shaft lever RH.
Using a screwdriver, bend the tabs of the lock washer.
Remove the lock nut and lock washer.
Remove the bolt and switch.
- HINT:
- Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.