VALVE BODY ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT SHIFT SOLENOID VALVE SL1


C151311E15

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) with a 21 W bulb → Terminal 1
    Battery negative (-) → Terminal 2
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


2. INSPECT SHIFT SOLENOID VALVE S1


C160563E01

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve S1 connector terminal - Shift solenoid valve S1 body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Shift solenoid valve S1 connector
    Battery negative (-) → Shift solenoid valve S1 body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


3. INSPECT SHIFT SOLENOID VALVE S2


C160564E01

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve S2 connector terminal - Shift solenoid valve S2 body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Shift solenoid valve S2 connector
    Battery negative (-) → Shift solenoid valve S2 body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


4. INSPECT SHIFT SOLENOID VALVE S3


C160563E02

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve S3 connector terminal - Shift solenoid valve S3 body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Shift solenoid valve S3 connector
    Battery negative (-) → Shift solenoid valve S3 body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


5. INSPECT SHIFT SOLENOID VALVE S4


C123198E03

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve S4 connector terminal - Shift solenoid valve S4 body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Shift solenoid valve S4 connector
    Battery negative (-) → Shift solenoid valve S4 body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


6. INSPECT SHIFT SOLENOID VALVE SL2


C151311E13

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) with a 21 W bulb → Terminal 1
    Battery negative (-) → Terminal 2
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


7. INSPECT SHIFT SOLENOID VALVE SR


C160565E01

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    Shift solenoid valve SR connector terminal - Shift solenoid valve SR body
    		20°C (68°F)
    		11 to 15 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Shift solenoid valve SR connector
    Battery negative (-) → Shift solenoid valve SR body
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


8. INSPECT SHIFT SOLENOID VALVE SLT


C162477E03

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) with a 21 W bulb → Terminal 2
    Battery negative (-) → Terminal 1
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.


9. INSPECT SHIFT SOLENOID VALVE SLU


C162477E04

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C (68°F)
    		5.0 to 5.6 Ω

  1. Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) with a 21 W bulb → Terminal 2
    Battery negative (-) → Terminal 1
    		Valve moves and makes an operating noise
    If the result is not as specified, replace the solenoid valve.