ENGINE UNIT > REPAIR |
for Preparation Click here
1. REPAIR INTAKE VALVE SEAT |
- NOTICE:
- Keep the lip free from foreign matter.
If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.
If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.
Handrub the valve and valve seat with an abrasive compound.
Check the valve seating position.
2. REPAIR EXHAUST VALVE SEAT |
- NOTICE:
- Keep the lip free from foreign matter.
If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.
If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.
Handrub the valve and valve seat with an abrasive compound.
Check the valve seating position.