RADIATOR > DISASSEMBLY |
for Preparation Click here
1. REMOVE RADIATOR DRAIN COCK |
Remove the drain cock plug.
Remove the O-ring from the drain cock plug.
2. ASSEMBLE SST |
- SST
- 09230-01010
(09231-01010, 09231-01030)
Engage the claw with the overhaul handle by inserting it into the hole in part A as shown in the illustration.
While gripping the handle, adjust dimension B to between 0.2 and 0.3 mm, using the stopper bolt.
- Dimension B:
- 0.2 to 0.3 mm (0.008 to 0.012 in)
- NOTICE:
- If the stopper bolt can not be adjusted, the claw may be damaged.
3. UNCAULK CORE PLATE |
Straighten the core plate by gripping it with SST until stopped by the stopper bolt.
- SST
- 09230-01010
(09231-01010, 09231-01030)
4. REMOVE UPPER RADIATOR TANK |
Lightly tap the radiator tank bracket (or radiator tank pipe) with a soft-faced hammer to remove the radiator tank.
5. REMOVE LOWER RADIATOR TANK |
- HINT:
- Perform the same procedures as for the upper radiator tank.