INPUT SHAFT > REASSEMBLY |
for Preparation Click here
1. INSTALL INPUT SHAFT FRONT BEARING |
Using SST and a press, install a new input shaft front bearing FR onto the input shaft.
- SST
- 09950-60010
(09951-00570)
09950-70010 (09951-07100)
- NOTICE:
- Install the input shaft front bearing with the snap ring groove facing to the front.
2. INSTALL FRONT BEARING SHAFT SNAP RING |
Select the correct input shaft front bearing snap ring so that the clearance between the input shaft and input shaft front bearing is within the specified values.
- Standard clearance:
- 0.1 mm (0.0039 in.) or less
Mark Thickness mm (in.) A 2.10 to 2.15 (0.0827 to 0.0846) B 2.15 to 2.20 (0.0846 to 0.0866) C 2.20 to 2.25 (0.0866 to 0.0886) D 2.25 to 2.30 (0.0886 to 0.0906) E 2.30 to 2.35 (0.0906 to 0.0925) F 2.35 to 2.40 (0.0925 to 0.0945) G 2.40 to 2.45 (0.0945 to 0.0965)
3. INSTALL INPUT SHAFT BEARING |
Apply gear oil to the input shaft bearing and install it onto the input shaft.
4. INSTALL NO. 2 SYNCHRONIZER RING |
Apply gear oil to synchronizer ring No. 2, and install it onto the input shaft.