CURTAIN SHIELD AIRBAG ASSEMBLY (for Regular Cab) > REMOVAL

for Preparation Click here



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


2. REMOVE ROOF HEADLINING ASSEMBLY
  1. Remove roof headlining assembly (Click here).



3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY
  1. Disconnect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.


  1. Remove the 8 bolts, and disengage the 5 claws and remove the curtain shield airbag assembly in the order show in the illustration.


    B203543