POWER OUTLET SOCKET > REMOVAL |
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE SWITCH BASE |
Detach the 2 clips and 2 claws.
Disconnect the connectors and remove the switch base.
3. REMOVE POWER OUTLET SOCKET ASSEMBLY |
Rotate the socket to disengage the notch.
Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover.
Remove the socket from the cover.