FRONT BUMPER > DISASSEMBLY |
for Preparation Click here
1. REMOVE FRONT SPOILER COVER |
Remove the 11 screws and front spoiler cover.
2. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY LH |
Remove the bolt.
Disengage the 2 claws and remove the front turn signal light assembly.
3. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY RH |
- HINT:
- Use the same procedure as for the LH side.
4. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
Remove the screw.
Disengage the 2 guides and remove the fog light assembly.
5. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
- HINT:
- Use the same procedure as for the LH side.
6. REMOVE FOG LIGHT COVER LH |
Disengage the 6 claws and remove the fog light cover LH.
7. REMOVE FOG LIGHT COVER RH |
- HINT:
- Use the same procedure as for the LH side.
8. REMOVE HOOD TO FRONT END PANEL SEAL |
Remove the 3 clips and hood to front end panel seal.
9. REMOVE UPPER FRONT BUMPER RETAINER |
Remove the 4 clips and remove the upper front bumper retainer.
10. REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM |
Remove the 2 screws.
Disengage the 4 claws and 2 guides, and remove the radiator grill (or front panel) emblem.
11. REMOVE RADIATOR GRILLE |
Disengage the 12 claws and remove the radiator grille.
12. REMOVE LOWER NO. 1 RADIATOR GRILLE |
Disengage the 16 claws and remove the lower No. 1 radiator grille.
13. REMOVE FRONT BUMPER HOLE COVER |
Disengage the 2 claws and remove the front bumper hole cover.
14. REMOVE FRONT BUMPER SIDE RETAINER LH |
Remove the bolt.
Disengage the claw and remove the front bumper side retainer LH.
15. REMOVE FRONT BUMPER SIDE RETAINER RH |
- HINT:
- Use the same procedure as for the LH side.
16. REMOVE RADIATOR SUPPORT OPENING COVER |
Remove the 4 clips and remove the radiator support opening cover.
17. REMOVE NO. 2 RADIATOR SIDE AIR SEAL |
Disengage the 2 claws and remove the No. 2 radiator side air seal.
18. REMOVE NO. 1 RADIATOR SIDE AIR SEAL |
Disengage the 2 claws and remove the No. 1 radiator side air seal.
19. REMOVE RADIATOR SUPPORT EXTENSION LH |
Disengage the 2 clamps and disconnect the thermistor assembly.
Disengage the 2 claws and remove the radiator support extension LH.
20. REMOVE RADIATOR SUPPORT EXTENSION RH |
Disengage the 2 claws and remove the radiator support extension RH.
21. REMOVE FRONT BUMPER ENERGY ABSORBER |
Disengage the 2 guides to remove the front bumper energy absorber.
22. REMOVE FRONT BUMPER REINFORCEMENT |
Disengage the 2 clamps and disconnect the wire harness.
Remove the 6 bolts and front bumper reinforcement.