FRONT BRAKE > REASSEMBLY |
for Preparation Click here
1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG |
- HINT:
- Fully tighten the front disc brake bleeder plug after bleeding any air left in the system.
2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP |
3. INSTALL PISTON SEAL |
Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal.
Text in Illustration Lithium Soap Base Glycol Grease
Install the piston seal to the disc brake cylinder.
- NOTICE:
- Securely install the piston seal into the groove of the disc brake cylinder.
4. INSTALL FRONT DISC BRAKE PISTON |
Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot.
Text in Illustration *1 Cylinder Boot *2 Front Disc Brake Piston Lithium Soap Base Glycol Grease
Install the cylinder boot to the front disc brake piston.
Apply a light layer of lithium soap base glycol grease to the contact surfaces of the front disc brake piston, and install it to the disc brake cylinder.
- NOTICE:
- Do not install the piston forcibly in the disc brake cylinder.
5. INSTALL CYLINDER BOOT |
Install the cylinder boot to the disc brake cylinder.
Text in Illustration *1 Set Ring *2 Cylinder Boot - NOTICE:
- Securely install the cylinder boot to the groove of the disc brake cylinder and front disc brake piston.
Install a new set ring.
- NOTICE:
- Securely install the set ring to the outer groove of the cylinder boot.
- Do not damage the cylinder boot.