HOOD > REASSEMBLY

for Preparation Click here



1. INSTALL HOOD BUMPER CUSHION

HINT:
Use the same procedure for both hood bumper cushions.
  1. Install a new hood bumper cushion.



2. INSTALL WASHER HOSE ASSEMBLY


    B277307E01
  1. Attach the 4 clamps to connect the washer hose to the hanger.

    Text in Illustration 
    *1
    Clamp
    *2
    Hanger


3. INSTALL WASHER NOZZLE SUB-ASSEMBLY
  1. Connect a new washer nozzle to the washer hose.

  1. Attach the 2 claws to install the washer nozzle.



4. INSTALL NO. 1 HOOD BULGE PROTECTOR (w/ Intercooler)

HINT:
When installing the No. 1 hood bulge protector, heat the hood bulge surface using a heat light.

Standard:
Item
Temperature
Hood Bulge
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the hood bulge excessively.
  1. Clean the hood bulge surface.

    1. Using a heat light, heat the hood bulge surface.

    2. Remove the double-sided tape from the hood bulge surface.

    3. Wipe off any tape adhesive residue with cleaner.



    B278369
  1. Install a new No. 1 hood bulge protector to the hood bulge as shown in the illustration.



5. INSTALL HOOD BULGE (w/ Intercooler)
  1. Install the hood bulge with the 10 nuts.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


6. INSTALL HOOD AIR INTAKE SEAL (w/ Intercooler)
  1. Install the hood air intake seal with the 18 clips.



7. INSTALL HOOD INSULATOR (w/ Hood Insulator)


    B277306E01
  1. Install the hood insulator with the 15 clips.

    Text in Illustration 
    *A
    w/o Intercooler
    *B
    w/ Intercooler


8. INSTALL HOOD TO RADIATOR SUPPORT SEAL
  1. Attach the 6 clips to install the hood to radiator support seal.