CLOCK > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for RHD and LHD vehicles.
  2. The procedure listed below is for LHD vehicles.


1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY
(Click here)


2. REMOVE AUTO CLOCK HOLE BEZEL


B277291
  1. Remove the 2 screws.

  1. Disconnect the connector and remove the auto clock hole bezel.



3. REMOVE CLOCK ASSEMBLY


B277292E01
  1. Using a screwdriver, detach the 6 claws and remove the clock.

    HINT:
    Tape the screwdriver tip before use.
    Text in Illustration 
    *1
    Protective Tape