METER / GAUGE SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE METER / GAUGE SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.


  1. Customizing driver side seat belt warning buzzer (w/ Driver Side Seat Belt Warning Buzzer)

    HINT:
    1. To accommodate users who cannot use a seat belt due to special circumstances, the driver side seat belt warning buzzer can be disabled at the dealer.
    2. Even if the driver side seat belt warning buzzer is disabled, the driver side seat belt warning light blinks when the driver side seat belt is not fastened.

    1. Turn the ignition switch to ON and press the ODO/TRIP switch to change the ODO/TRIP meter to the ODO display.

    2. Turn the ignition switch off.

    3. Turn the ignition switch to ON, and then, within 6 seconds, press and hold the ODO/TRIP switch for 10 seconds or more.

    4. Fasten the driver side seat belt to enter buzzer cancel mode.



      5. E227239E01

    5. Press the ODO/TRIP switch to switch between on and off.

      Text in Illustration 
      *a
      		Driver side seat belt warning buzzer is enabled
      *b
      		Driver side seat belt warning buzzer is disabled

    6. Wait 10 seconds without pressing the ODO/TRIP switch, or turn the ignition switch off to end buzzer cancel mode.

      HINT:
      When a cable is disconnected from the battery, the buzzer setting is reset and the buzzer becomes enabled again.


  1. Customizing fuel consumption (w/ Accessory Meter Assembly)

    HINT:
    The units for the average fuel consumption and current fuel consumption can be switched between "L/100km" and "km/l".

    1. Press the INFO switch to display the average fuel consumption or current fuel consumption display.

    2. Press and hold the INFO switch for 2.3 seconds or more.



      3. E224599

    3. Press the RESET switch and select "L/100km" or "km/l".

      HINT:
      The initial setting is "km/l".

    4. Press the INFO switch to end fuel consumption customize mode.