HEADLIGHT RELAY (w/ Daytime Running Light Control) > ON-VEHICLE INSPECTION |
for Preparation Click here
1. INSPECT HEADLIGHT RELAY (Marking: H-LP) |
Remove the engine room relay block cover.
Remove the headlight relay from the engine room relay block.
Inspect the headlight relay resistance.
- Standard resistance:
Terminal Connection Specified Condition 3 - 5 10 kΩor higher 3 - 5 Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
Install the headlight relay to the engine room relay block.
Install the engine room relay block cover.