DIRECT CLUTCH > REASSEMBLY

for Preparation Click here



1. INSTALL DIRECT CLUTCH PISTON


D001453E03
  1. Coat 2 new O-rings with ATF, and install them in the direct clutch piston.



    D001354E01
  1. Be careful not to damage the O-rings, and press the direct clutch piston into the clutch drum with both hands.



2. INSTALL DIRECT CLUTCH RETURN SPRING


D001349E04


    D001348E04
  1. Place SST on the spring retainer, and compress the return spring with a press.

    SST
    09350-30020   (09350-07040)
  1. Using SST, install the snap ring.

    SST
    09350-30020   (09350-07070)

    NOTICE:
    Be sure the end gap of the snap ring is not aligned with the spring retainer claw.


3. INSTALL DIRECT CLUTCH FLANGE


AT01640E01
  1. Install the cushion plate.

  1. Install the 4 plates and 4 discs.

    Install in order:
    P - D - P - D - P - D - P - D

    HINT:
    P = Plate
    D = Disc
  1. Install the flange with the flat end facing downward.



    G037155E01
  1. Using a screwdriver, install the snap ring.

    NOTICE:
    Be sure the end gap of the snap ring is not aligned with the cutout portion of the direct clutch drum.


4. INSPECT PACK CLEARANCE OF DIRECT CLUTCH


AT08250E01
  1. Place the direct clutch assembly onto the O/D support assembly.



    G037156E02
  1. Using SST and a dial indicator, measure the direct clutch pack clearance while applying and releasing compressed air (186 to 206 kPa (1.9 to 2.1 kgf/cm2, 27 to 30 psi)).

    SST
    09350-30020   (09350-06120)

    Pack clearance:
    0.40 to 0.70 mm (0.016 to 0.028 in.)
    If the pack clearance is not as specified, parts may have been assembled incorrectly. Check and reassemble again.
    If the pack clearance is still not as specified, select another flange.

    HINT:
    There are 8 different flange thicknesses.

    Standard flange thickness:
    No.
    Specified Condition
    No.
    Specified Condition
    53
    3.3 mm (0.130 in.)
    57
    3.7 mm (0.146 in.)
    54
    3.4 mm (0.134 in.)
    58
    3.8 mm (0.150 in.)
    55
    3.5 mm (0.138 in.)
    60
    4.0 mm (0.157 in.)
    56
    3.6 mm (0.142 in.)
    62
    4.2 mm (0.165 in.)