FRONT SEAT INNER BELT ASSEMBLY (for Power Seat) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedures for RHD and LHD vehicles.
  2. The procedures listed below are for LHD vehicles.


1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT SEAT ASSEMBLY LH

  1. Remove the front seat assembly (Click here).



4. REMOVE FRONT SEAT INNER CUSHION SHIELD LH


    B289612

  1. Remove the screw.

  1. Detach the claw and guide.



    B289613

  1. Pull the front seat inner cushion shield LH to detach the claw and remove the front seat inner cushion shield LH.



5. REMOVE FRONT SEAT INNER BELT ASSEMBLY


B284021E01

  1. Disconnect the connector and detach the 3 clamps.



    B284020

  1. Roll up the front seat cushion cover LH.

  1. Remove the nut and front seat inner belt assembly.

  1. Remove the buckle cover.



6. REMOVE FRONT SEAT CUSHION COVER LH


    B284016E01

  1. Remove the front seat cushion cover LH.