TRANSFER ADAPTER OIL SEAL > INSTALLATION |
for Preparation Click here
1. INSTALL TRANSFER ADAPTER OIL SEAL |
Coat the lip of a new oil seal with MP grease.
Using SST and a hammer, tap in the oil seal.
- SST
- 09223-00010
- Oil seal depth:
- 45.9 +- 0.5 mm (1.807 +- 0.020 in.)
- NOTICE:
- Be careful not to damage the lip of the oil seal.
2. INSTALL TRANSFER ASSEMBLY |
Install the transfer assembly (Click here).
3. INSTALL MANUAL TRANSMISSION UNIT ASSEMBLY |
Install the manual transmission unit assembly (Click here).