POWER WINDOW CONTROL SYSTEM > SYSTEM DESCRIPTION |
for Preparation Click here
POWER WINDOW CONTROL SYSTEM DESCRIPTION |
The main controls of this system are: the power window regulator master switch, which is built into the driver side door, and the power window regulator switches, which are built into the front passenger side door and rear doors*. Pressing a regulator switch either any of the switches on the master switch transmits an up/down signal to the corresponding power window regulator motor.
The jam protection function operates using a magnet on the worm gear of the power window regulator motor and the Hall ICs on the connector.
*: for Double Cab
FUNCTION OF MAIN COMPONENT |
*2: except Double Cab
*3: w/o Regulator
*4: w/ Regulator
Component | Outline |
Power window regulator master switch assembly |
|
Power window regulator switch assembly |
|
Power window regulator motor assembly*3 Door window regulator sub-assembly*4 |
|
SYSTEM FUNCTION |
*1: for Driver Side
*2: for Double Cab
*3: except Double Cab
*4: w/o Regulator
*5: w/ Regulator
Function | Outline |
Manual up/down function |
|
Auto up/down function*1 | Function that enables window of driver side door to be fully opened or fully closed by one full push downward or one full pull upward on power window regulator master switch assembly, respectively |
Jam protection function*1 | Function that automatically stops driver side power window and moves it downward if object is jammed in driver side power window during auto up operation |
Remote up/down function |
|
Window lock function |
|
Diagnosis*1 |
|
Fail-safe*1 |
|