FLOOR SHIFT ASSEMBLY > REMOVAL |
for Preparation Click here
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
Remove the parking brake hole cover sub-assembly (Click here).
3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
Remove the upper console panel sub-assembly (Click here).
4. REMOVE CONSOLE BOX ASSEMBLY |
Remove the console box assembly (Click here).
5. REMOVE FLOOR SHIFT ASSEMBLY |
Disconnect the 2 connectors and clamp.
Move the shift lever to L.
Disconnect the transmission control cable.
Remove the 4 bolts.
Remove the floor shift.