FRONT PASSENGER AIRBAG ASSEMBLY > INSTALLATION |
for Preparation Click here
- CAUTION:
- Be sure to read the precautionary notices concerning the SRS airbag system before servicing (Click here).
1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY |
Attach the 12 claws to install the airbag.
Attach the clamp to the bracket.
Tighten the 2 bolts.
- Torque:
- 20 N*m{ 204 kgf*cm , 15 ft.*lbf }
Connect the connector to the airbag.
- NOTICE:
- When handling the airbag connector, do not damage the airbag wire harness.
2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
Attach the 2 hinges to install the glove compartment door.
Text in Illustration *1 Hinge
While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
Text in Illustration *1 Stopper
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
4. PERFORM INITIALIZATION |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
5. INSPECT SRS WARNING LIGHT |
Check the SRS warning light (Click here).