Transponder Key ECU Assembly
DTC Code
| Detection Item
| Detection Enabling Condition (DTC Output Confirmation Operation)
| See page
|
B2780
| Push Switch / Key Unlock Warning Switch Malfunction
| Insert the key into the ignition key cylinder.
|
Click here
|
B2784
| Antenna Coil Open / Short
| Insert the key into the ignition key cylinder.
|
Click here
|
B2793
| Transponder Chip Malfunction
| Insert the key into the ignition key cylinder.
|
Click here
|
B2794
| Unmatched Encryption Code
| Insert the key into the ignition key cylinder.
|
Click here
|
B2795
| Unmatched Key Code
| Insert the key into the ignition key cylinder.
|
Click here
|
B2796
| No Communication in Immobiliser System
| Insert the key into the ignition key cylinder.
|
Click here
|
B2797
| Communication Malfunction No. 1
| Insert the key into the ignition key cylinder.
|
Click here
|
B2798
| Communication Malfunction No. 2
| Insert the key into the ignition key cylinder.
|
Click here
|
ECM
DTC Code
| Detection Item
| Detection Enabling Condition (DTC Output Confirmation Operation)
| See page
|
B2799
| Engine Immobiliser System Malfunction
| Either condition is met:
- Within 10 seconds of an engine start operation being performed (with the shift lever in P and the brake pedal*1 or clutch pedal*2 depressed, turn the ignition switch to ON). If there is a malfunction, the engine stops (communication begins within 3 seconds of the engine start operation being performed, and DTCs are stored after 6 seconds).
- 10 seconds after the ignition switch is turned to ON after reconnecting the cable to the negative (-) battery terminal (communication begins within 3 seconds of the ignition switch being turned to ON, and DTCs are stored after 6 seconds).
|
Click here
|
B279A*3
| Theft Deterrent System Communication Line High Fixation
| Turn the ignition switch to ON and wait 6 seconds.
|
Click here
|
B279C*3
| Theft Deterrent System Presence Detection
| Check for DTCs.
|
Click here
|
