AIRBAG SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
  1. Use these procedures to troubleshoot the supplemental restraint system.
  1. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.CHECK FOR DTC*

    1. Check for DTC and note any codes that are output.

    2. Delete the DTC.

    3. Recheck for DTC.

      Result:
      Result
      		Proceed to
      DTC does not reoccur
      		A
      DTC reoccurs
      		B


    		B.
    Go to step 6
    A


    4.PROBLEM SYMPTOMS TABLE

      Result:

      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B


    		B.
    Go to step 6
    A


    5.OVERALL ANALYSIS AND TROUBLESHOOTING

    1. On-vehicle inspection (Click here), (Click here), (Click here).

    2. Terminals of ECU (Click here).


    NEXT


    6.REPAIR OR REPLACE

      NEXT


      7.CONFIRMATION TEST

        NEXT

        END