BACK-UP LIGHT SWITCH > INSPECTION

for Preparation Click here



1. INSPECT BACK-UP LIGHT SWITCH ASSEMBLY


    C226318E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Pushed
    Below 1 Ω
    1 - 2
    Released
    10 kΩ or higher
    Text in Illustration 
    *a
    Pushed
    *b
    Released
    1. If the result is not as specified, replace the back-up light switch assembly.