FRONT WIPER MOTOR > ON-VEHICLE INSPECTION |
for Preparation Click here
1. INSPECT WINDSHIELD WIPER LINK ASSEMBLY |
Operate the front wipers while spraying washer fluid on the windshield glass. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.
- Standard:
Area Standard Condition A 25.0 mm (0.984 in.) B 30.4 mm (1.19 in.) C 24.3 mm (0.956 in.) D 24.7 mm (0.972 in.) E 19.0 mm (0.748 in.)
Stop the front wiper motor and link assembly operation.
Check the automatic stop position.
Text in Illustration *A for LH Side *B for RH Side *1 Louver Edge - OK:
- The front wipers stop at the positions shown in the illustration.
- Standard:
Area Standard Condition A 25 mm (0.984 in.) B 33 mm (1.29 in.) C 25 mm (0.984 in.) D 25 mm (0.984 in.)
If the result is not as specified again, inspect the wiper motor and link assembly with it removed from the vehicle body (Click here).