CLEARANCE WARNING ECU > INSTALLATION |
for Preparation Click here
1. INSTALL REAR CLEARANCE WARNING ECU ASSEMBLY |
Install the rear clearance warning ECU with the bolt.
Connect the connector.
2. INSTALL QUARTER INSIDE TRIM BOARD RH |
Detach the 8 claws and 10 clips to install the quarter inside trim board.
Install the clip.
Connect the rear No. 2 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
Connect the rear No. 1 seat outer belt floor anchor with the bolt.
- Torque:
- 42 N*m{ 428 kgf*cm , 31 ft.*lbf }
Attach the 2 claws to install the outer lap belt anchor cover.
- HINT:
- Use the same procedure for both outer lap belt anchor covers.
3. INSTALL QUARTER TRIM HOOK |
- HINT:
- Use the same procedure for both quarter trim hooks.
Install the quarter trim hook with the screw.
4. INSTALL BACK DOOR SCUFF PLATE |
Attach the 4 claws, 2 guides and 6 clips to install the back door scuff plate.
5. INSTALL REAR DOOR SCUFF PLATE RH |
Attach the 2 clips and 7 claws to install the rear door scuff plate RH.
6. INSTALL REAR NO. 2 SEAT ASSEMBLY RH |