INTEGRATION RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT INTEGRATION NO.1 RELAY (HORN RELAY)


G034545E02
  1. Using a screwdriver, detach the 2 claws and disconnect the integration relay from the engine room junction block.

    HINT:
    Tape the screwdriver tip before use.


    A099733E03
  1. Measure the voltage of the HORN relay.

    Standard voltage:
    Tester Connection
    Condition
    Specified Condition
    1I-8 - Body ground
    Horn switch ON
    10 to 14 V
    If the result is not as specified, replace the integration relay.