SECOND COAST BRAKE > REASSEMBLY |
for Preparation Click here
1. INSTALL 2ND COAST BRAKE PISTON ROD |
Check the piston rod length.
- HINT:
- There are 2 different standard lengths for the piston rod.
- Standard piston rod length:
Groove Number Length 0 78.4 mm (3.087 in.) 1 79.9 mm (3.146 in.)
Install the washer plate, compression spring and piston to the piston rod.
Firmly hold down the piston, then compress the compression spring.
Install the E-ring.
2. INSTALL 2ND COAST BRAKE PISTON OIL SEAL RING |
Coat the oil seal ring with ATF.
Spread the ends of the ring to install the oil seal ring to the piston groove. Then squeeze its ends together.
- NOTICE:
- Do not expand the ring ends excessively.