PARK / NEUTRAL POSITION SWITCH > REMOVAL |
for Preparation Click here
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag activation.
2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
Remove the 2 bolts and heat insulator.
Disconnect the switch connector.
Using a screwdriver, pry out the lock washer.
Remove the lock nut and lock washer.
Remove the bolt and park/neutral position switch.
- HINT:
- Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.