OUTER REAR VIEW MIRROR > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)


    B173076
  1. Using a clip remover, remove the snap ring.

  1. Remove the front door window regulator handle assembly and front door regulator inside handle plate.



2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL


    B190634
  1. Using a moulding remover, disengage the 3 claws and remove the front door inside handle bezel.



3. REMOVE FRONT ARMREST BASE PANEL UPPER (w/o Power Window)


    B190635
  1. Using a moulding remover, disengage the 2 clips and 6 claws, and remove the front armrest upper base panel.

  1. w/ Power Door Lock:

    1. Disconnect the connector.



4. REMOVE FRONT ARMREST BASE PANEL UPPER (w/ Power Window)


    B190636
  1. Using a moulding remover, disengage the 2 clips and 6 claws.

  1. Disconnect the connector and remove the front armrest upper base panel.



5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    B163639E01
  1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and disconnect the door armrest cap.



    B159116
  1. Remove the 2 screws.



    B190689
  1. Using a clip remover, disengage the 10 clips.

  1. Disengage the 5 claws and separate the front door trim board sub-assembly from the front door inner glass weatherstrip.



    B159118
  1. Disengage the 2 claws and disconnect the front door inside handle sub-assembly.



6. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Front No. 2 Speaker)


    B190658
  1. Disengage the clip and clamp, and remove the front door lower frame bracket garnish.



7. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Front No. 2 Speaker)


    B190659
  1. Disengage the clip and clamp.

  1. Disconnect the connector and remove the front door lower frame bracket garnish.



8. REMOVE OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER


    B183789
  1. Disconnect the clamp and connector.

  1. Remove the 3 bolts.

  1. Disengage the claw and remove the outer rear view mirror assembly with cover.



9. REMOVE OUTER MIRROR GLASS (for TMC Made)


    B193175
  1. Apply protective tape to the bottom of the visor of the door mirror.

  1. Push the upper part of the mirror surface and tilt it.

  1. Using a moulding remover, disengage the 2 claws.



    B193303
  1. Disengage the 2 guides at the upper part of the outer mirror as shown in the illustration.



  1. w/ Heater:



      B193174
    1. Disconnect the connectors.

  1. Remove the outer mirror glass.



10. REMOVE OUTER MIRROR COVER (for TMC Made)


    B164072
  1. Disengage the 7 claws and remove the outer mirror cover from the outer rear view mirror assembly with cover.



11. REMOVE OUTER MIRROR COVER (except TMC Made)


    B197216E01
  1. Put protective tape around the outer mirror cover.



    B197217E01
  1. Push the lower part of the mirror surface and tilt it.

  1. Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws B, from the clearance between the outer mirror glass and visor.

  1. Disengage the claw A.



    B197218
  1. Disengage the 4 claws and remove the outer mirror cover.