CHARGING SYSTEM > Noise Occurs from Generator while Engine is Running

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK LOOSENESS OF V-RIBBED BELT
  1. Check the tension of the belt by pushing it down with a finger.

    OK:
    The tension of the belt is enough.


NG
REPLACE V-RIBBED BELT TENSIONER ASSEMBLY (Click here)
OK


2.CHECK V-RIBBED BELT FOR WEAR
  1. Check the V-ribbed belt for wear.

    OK:
    The V-ribbed belt is not worn.


NG
REPLACE V-RIBBED BELT (Click here)
OK


3.CHECK CLUTCH PULLEY FOR WEAR
  1. Check the clutch pulley groove for wear or other defects.

    OK:
    The clutch pulley groove is not damaged.


NG
REPLACE CLUTCH PULLEY (Click here)
OK


4.CHECK FOR NOISE WHILE CLUTCH PULLEY IS OPERATING
  1. Perform a driving test and check if noise occurs when decelerating.

    OK:
    Noise does not occur.


NG
REPLACE CLUTCH PULLEY (Click here)
OK

REPLACE GENERATOR ASSEMBLY (Click here)