INTEGRATION RELAY > INSPECTION

for Preparation Click here



1. INSPECT INTEGRATION NO.1 RELAY



A186598E01



  1. EFI MAIN RELAY:



      A095606E07
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:

      Tester Connection
      Condition
      Specified Condition
      Integration relay (1E-1) - Integration relay (1B-4)
      Battery voltage is not applied between terminals 1B-3 and 1B-2
      10 kΩ or higher
      Integration relay (1E-1) - Integration relay (1B-4)
      Battery voltage is applied between terminals 1B-3 and 1B-2
      Below 1 Ω
      If the resistance is not as specified, replace the integration relay.


  1. IG2 RELAY:



      A095606E07
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:

      Tester Connection
      Condition
      Specified Condition
      Integration relay (1E-1) - Integration relay (1A-4)
      Battery voltage is not applied between terminals 1A-2 and 1A-3
      10 kΩ or higher
      Integration relay (1E-1) - Integration relay (1A-4)
      Battery voltage is applied between terminals 1A-2 and 1A-3
      Below 1 Ω
      If the resistance is not as specified, replace the integration relay.


  1. HORN RELAY:



      A095606E07
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:

      Tester Connection
      Condition
      Specified Condition
      Integration relay (1E-1) - Integration relay (1A-8)
      Battery voltage is not applied between terminals 1A-6 and 1A-7
      10 kΩ or higher
      Integration relay (1E-1) - Integration relay (1A-8)
      Battery voltage is applied between terminals 1A-6 and 1A-7
      Below 1 Ω
      If the resistance is not as specified, replace the integration relay.