TRANSMISSION WIRE > INSPECTION |
for Preparation Click here
1. INSPECT TRANSMISSION WIRE |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection ATF Temperature Specified Condition 1 (THO) - 6 (E2) 10°C (50°F) 5 to 8 kΩ 1 (THO) - 6 (E2) 25°C (77°F) 2.5 to 4.5 kΩ 1 (THO) - 6 (E2) 110°C (230°F) 0.22 to 0.28 kΩ
- HINT:
- If the resistance is out of the specified range with the ATF temperature shown in the table above, the driveability of the vehicle may decrease.