PARK / NEUTRAL POSITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

  1. Disconnect the park/neutral position switch connector.



    C178681E01

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:

    Tester Connection
    		Condition
    		Specified Condition
    2 - 6 and 4 - 5
    		P position
    		Below 1 Ω
    Except P position
    		10 kΩ or higher
    2 - 1
    		R position
    		Below 1 Ω
    Except R position
    		10 kΩ or higher
    2 - 9 and 4 - 5
    		N position
    		Below 1 Ω
    Except N position
    		10 kΩ or higher
    2 - 7
    		D position and 3 position
    		Below 1 Ω
    Except D position and 3 position
    		10 kΩ or higher
    2 - 3
    		2 position
    		Below 1 Ω
    Except 2 position
    		10 kΩ or higher
    2 - 8
    		L position
    		Below 1 Ω
    Except L position
    		10 kΩ or higher
    If the result is not as specified, replace the park/neutral position switch.