NAVIGATION SYSTEM (for Navigation Receiver Type) > Vehicle Position Mark is not Updated

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK MAP DISC


    I100152E12

  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc


NG
REPLACE MAP DISC
OK


2.CHECK NAVIGATION DISPLAY

  1. Check if touch scrolling can be performed on the map display.

    OK:
    Touch scrolling can be performed.


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK


3.CHECK VEHICLE SENSOR (OPERATION CHECK)


    E176549

  1. Enter the "Vehicle Sensors" screen. Refer to Check GPS & Vehicle Sensors in Operation Check (Click here).

  1. While driving the vehicle, compare the "Speed" indicator to the reading on the speedometer. Check if these readings are almost equal.

    OK:
    The readings are almost equal.


NG
CHECK DTC OUTPUT (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)