FUEL INJECTOR (for Direct Injection) > INSPECTION |
for Preparation Click here
1. INSPECT DIRECT FUEL INJECTOR ASSEMBLY |
- NOTICE:
- This inspection aims at checking the direct fuel injector assembly for an open or short. Because the direct fuel injector assemblies of this vehicle are a high-pressure type, fuel injection volume cannot be checked.
Measure the resistance according to the value(s) in the table below.
Text in Illustration *a Component without harness connected
(Direct fuel injector Assembly)
If the result is not as specified, replace the direct fuel injector assembly.Standard Resistance: Tester Connection Condition Specified Condition 1 - 2 20°C (68°F) 1.74 to 2.04 Ω