DTC    C1AB6    Blind Spot Monitor Master Module

for Preparation Click here


DESCRIPTION

This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.

DTC No.
DTC Detection Condition
Trouble Area
C1AB6
The blind spot monitor sensor RH (master) detects an internal malfunction.
Blind spot monitor sensor RH

INSPECTION PROCEDURE

NOTICE:
When checking for DTCs, make sure that the blind spot monitor main switch (warning canceling switch assembly) is on.
1.CHECK DTC

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same DTC is output again.

    OK:
    No DTCs are output.


NG
REPLACE BLIND SPOT MONITOR SENSOR RH (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)