LICENSE PLATE LIGHT ASSEMBLY (for TMC, TMMR Made) > REMOVAL |
for Preparation Click here
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure described below is for the LH side.
1. REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY |
2. REMOVE LICENSE PLATE LIGHT ASSEMBLY |
Disconnect the connector.
Disengage the 2 claws and remove the license plate light assembly.
3. REMOVE LICENSE PLATE LIGHT BULB |
Insert a screwdriver wrapped with protective tape into the license plate light lens hole, tilt it in the direction shown in the illustration and disengage the 2 claws to remove the license plate light lens.
Text in Illustration *1 Protective Tape *a Insert into the hole
Remove the license plate light bulb.