REAR COMBINATION LIGHT ASSEMBLY (for TMC, TMMR Made) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.


1. REMOVE REAR BUMPER ASSEMBLY
(Click here)


2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT

  1. Remove the luggage compartment floor mat.



3. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)

  1. Remove the baggage holder net.



4. REMOVE REAR FLOOR FINISH PLATE


    B294805

  1. Remove the 5 clips.



    B294806

  1. Disengage the 4 clips and remove the rear floor finish plate.



5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    B283876E01

  1. Push the pin and remove the No. 1 luggage compartment trim hook.

    Text in Illustration 
    *1
    		Pin


6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER


    B281707

  1. Remove the 3 clips.

  1. Disengage the fastener and remove the luggage compartment inner trim cover LH.



7. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    E226763

  1. Disconnect each connector.

  1. Disengage the clamp.



    E226764

  1. Remove the 4 nuts and rear combination light assembly.